GW1202 v2 VS SWG2008

Chassis appearance

The appearance of the two chassis is basically the same, the difference lies in the silk screen on the upper right corner, SWG2008 has obvious model silk screen, GW1202 V2 has no model silk screen.

Numbers of gateway modules supported

2

2

Whether support the core board

Support

Note: If there is no core board in this chassis, then it supports functions and modules which supported by GW1202 V1 .

Support

Note: this chassis must be inserted one core board, unless it won’t work.

GWM1202 V2 and SWG2008 core board system can be divided into two types：

1. Wireless gateway

2. Analog gateway

The core board can be installed one of the two systems before leaving factory. The core board mainly works as the master of GWM420G/W/L and GWM820S/O.

Modules supported

1. Wireless module：GWM400G/W   GWM420G/W/L（need the core board）    GWM401G/W/L

2. Analog module：GWM800S/O    GWM820S/O（need the core board）    GWM801S/O

3. E1/T1 digital module：ET200X

1. Wireless module：GWM420G/W/L（need the core board） 

2. Analog module：GWM820S/O（need the core board） 

Whether to support modules mixed insertion

Support

1. Without GWM420G/W/L or GWM820S/O：

GWM400G/W

GWM401G/W/L

GWM800S/O

GWM801S/O

ET200X

Any two of modules above can be mixed in one chassis

1. With one GWM420G/W/L or GWM820S/O（need one core board). The chassis can be inserted one of the below modules：

GWM400G/W

GWM401G/W/L

GWM800S/O

GWM801S/O

ET200X

Note: GWM420G/W/L and GWM820S/O can’t be inserted in one chassis in the same time. Because the core board only can be installed one system (wireless system or analog system). If GWM420G/W/L and GWM820S/O are inserted in one chassis in the same time, only the board whose core board inserted can be detected.

Not support

SWG2008 can only support GWM420G/W/L or GWM820S/O.

Default login information link:

Query login information