This document mainly describes the detailed steps of connecting the wireless gateway with Freepbx.
Follow the steps below to configure two-way calls between the phone and the gateway:
Outgoing call: from Freepbx SIP extension 3002 to the gateway through relay 1008;
Incoming call: call from an outside line to the gateway, through SIP trunk 1008 to Freepbx, and then send the call to the 3002 SIP extension through Freepbx;
In the following steps, the parameters below are mandatory configurations, and other parameters can be configured according to your needs.
Step1. Create a SIP Trunk in Freepbx Server
Please login your Freepbx server to create a SIP trunk(1008) .In Freepbx server web, please choose “Connectivity—>Trunks—>Add SIP (chan_sip)Trunk” to set like that:
Step 2. Create a sip extension named 3002
Create a sip extension named 3002 in webpage “Applications---->Extensions”.
Step 3. Configure Routings in Freepbx
Outbound routing rules：
Inbound routing rules:
Step 4. Set Network Parameters in Web
Log in to the network in the browser, and click "Network -> LAN Settings" to set your network parameters. The figure below is an example for reference only.
Step 5. Create a SIP Endpoint in Web
Please select “SIP—>SIP Endpoints—>Add New SIP Endpoint” to set SIP trunk. The following figure shows detail information about how to set it.
hostname or IP Address
you need to enter your PBX IP. 172.16.2.51
The default port of SIP in FreePBX is 5160
About other parameters in SIP, please set by your requirements for there is no need to set them in simple calls.
Step 6. Set Routing Rules in Web
Click “ROUTING—> Call Routing Rules—> New Call Routing Rule” to set outbound and inbound routing rules like the following:
Inbound routing rules:
Outbound routing rules:
Please save all your changes to make effect.
Step 7. Register a SIP extension by software
Taking advantage of SIP software such as Xlite, eyeBeam to register a SIP extension(3002).
Incoming call test: Dial the number of port 1 on the gateway via your mobile to see if 3002 will ring. If 3002 rings, it means your configuration is successful; unless, it means there is something wrong with your configuration, please check it.
Outgoing call test: Dial your mobile number on 3002 extension registered in a software phone. If your mobile rings, it means your configuration is ok; unless, please check your configuration.