Connect Your IPPBX

Cable Connection

Connect your IPPBX to the local network, and connect telephony lines to the IPPBX.

Please use the dedicated power adapter. Otherwise, the failure or damage caused by other power adapters is not covered by the warranty.

①   Connect your IPPBX to the network.

Connect one end of an Ethernet cable to the LAN port of your IPPBX, and the other end to any port of your company’s LAN switch/router.

②   Power on your IPPBX.

Plug the provided power cord or power adapter into the power inlet of the IPPBX, and the other end to a standard electrical wall socket. Wait for the system to boot up till the SYSTEM LED starts to blink.

③   Connect your IPPBX to the telephony lines.

Note:

Please connect BRI/PSTN/analog phone/fax machine to the corresponding port based on the color of port indicator.

RJ11 Port

Operation

FXS

Connect one end of a RJ11 phone cable to the port. Connect the other end to the analog phone or fax machine.

FXO

Connect an RJ11 cable to the FXO port. Connect the other end to a PSTN line.

BRI

For IX160(P)

Connect one end of the cable provided by the ISDN BRI provider to the BRI port. Connect the other end to the equipment of ISDN provider.

E1/T1/J1 Port

Operation

E1/T1/J1

For IX160(P)

  • Connect one end of the E1 cable to the E1/T1 port. Connect the other end to the E1 Provider’s equipment.

Login administrator interface

  1. Connect the computer to the same network with the IPPBX device;

  2. Open a web browser and enter the default IP address of OpenVox IPPBX system: 172.16.101.1;

  3. Use the default username(admin) and password(admin) to log in to the administrator interface.