The default IP address of SWG wireless gateway and VoxStack V2 wireless gateway is 172.16.98.1. The default IP address of VoxStack V1 wireless gateway is 172.16.99.1. You can change IP address on LAN Settings page.
The default username and password of GSM/CDMA/WCDMA VoIP Gateway are :
Username:admin
Password:admin
You can change username and password on Login Settings page.
Yes,you can send SMS on GSM/CDMA/WCDMA VoIP Gateway Web GUI.The send SMS can be checked on "SMS Outbox" page.
Yes,you can send SMS to multiple destinations on GSM/CDMA/WCDMA VoIP Gateway Web GUI.You can type multiple desired numbers as the destination.
And different numbers should be separated by symbols:semicolon,vertical Bar,comma,blank,colon and dot.
Yes,you can check the received SMS on GSM/CDMA/WCDMA VoIP Gateway "SMS Inbox" page.
Yes,it does.
Please go here:
https://www.openvox.cn/pub/documents/other_documents/OpenVox_SMS_API_Demo_.pdf
Check if the Destination Number,Port are correct on SMS Sender page.If the configuration are corrent,please check if the SIM card is out of credit.
Please check the configuration on GSM/CDMA/WCDMA VoIP Gateway.
1)Check if the SMS Received and SMS Local Stored are opened on the SMS Settings page.
2)Check if the message was sent successfully.
You can add an SIP or IAX2 extension on VoIP Endpoints page.
1)Click "Add New SIP Endpoint" or Click "Add New IAX2 Endpoint".
2)Fill in the Name,User Name and Password,and then select the registration method.
3)Click save and apply.
For more configuration details please go here:
http://downloads.openvox.cn/pub/manuals/Release/English/GSM_3G%20Gateway_User_Manual_EN.pdf
The higher the ranking, the higher the priority.
You cannot change the IMEI code for the SIM cards installed in CDMA/WCDMA VoIP Gateway,but you can change the IMEI code for the SIM cards installed in GSM VoIP Gateway on Module Settings page.
Yes,you can turn on call forwarding for the SIM cards installed in CDMA/WCDMA VoIP Gateway on Call Forwarding page.First select the need to open the call forwarding port,and then select the call type and fill in Call Number,and finally click Setting.
Yes,you can turn on call waiting for the SIM cards installed in CDMA/WCDMA VoIP Gateway on Call Waiting page.
Yes,you can configure the single call max duration and the monthly max call duration for a SIM card on the Module Settings page.
No,this is not supported on GSM/CDMA/WCDMA VoIP Gateway.You cannot have Internet access from the SIM cards.
The blacklist is used to filter the IP address.If a IP address is in the blacklist,the IP address will not be able to log in this Gateway.The whitelist is used to put the IP address in the trust field.
Notes:
1)You can input IP address in blacklist/whitelist.
Example:if you want only your IP address can login this Gateway and all other IP address cannot login this Gateway,you could put your IP address in the whitelist and "0.0.0.0" in the blacklist.
2)Whitelist has higher priority than blacklist.
Please click "Apply" in the lower right corner of the page if you want to save the modified configuration.It will take 1-2 seconds to make it work.
Please log in ssh and execute command rm -rf /data/info/user.db, then account and password will be reset to admin.
Please press Download Backup button in System-----→System Tools page.
Please choose configuration file and then press File Upload in System-----→System Tools page.
Please click account and you will find it.
Please see Information page.
1:enter your mobile number
2: tick the port you want to know number and press Copy to Selected button
3: press Execute button and your mobile will rings.
Tick the port, select the module firmware, then press Update button.
Reboot gateway once you insert boards.
Please read the manual and operate steps one by one.
image file : http://image.openvox.cn/AutoRecovery/
1:You can connect device's Wan port to a router, find the ip via router
2: Gateway's Lan has a reserved ip (192.168.99.1 255.255.255.0), you can visit webpage via this ip.
Please visit NETWORK-----→Toolkit webpage, choose network port and press Start button.