| Warning | ||
|---|---|---|
| ||
All steps below MUST be carried on under windows XP or windows 7 32bit system. The firmware file "SIM840W_firmware_current.zip" must be decompressed under path without any SPACE like "E:\myfiles\", if it is "E:\my files\", the files will be broken after unzipped. Please take this note seriously! |
Step 1 Download Related files
...
Versions | Modules | IP Address |
| WGW1002G | 2G | 172.16.99.1 |
VS-GW1200-4G | 1 * 4G | 172.16.99.1 |
VS-GW1600-8G | 2 * 4G | 172.16.99.1-2 |
VS-GW1600-20G | 5 * 4G | 172.16.99.1-5 |
VS-GW2120-44G | 11 * 4G | 172.16.99.1-11 |
...
- Open web browser to enable Remote COM:
Then tart RemoteCom to connect the target gateway:
Run QuecFOTA_V1.3 flash tool:
- Click "Config", you will see the setting window:
Choose "115200" and "1K Bytes":
Select the right firmware bin file:
Choose Virtual COM 3,4,5,6 above corresponds to GSM port 1,2,3,4:
- Click "Start the SW upgrade" to be ready for flash procedure.
Then click "Power Off Remote GSM Modules" and "Power On Remote GSM Modules" to activate the flash tool.
Now you can see the flash procedure is in full swing.
Once it reaches 100%, you will see following picture which means flashing successfully.
- Click "Leave Remote COM" to bring gateway back to work.
- Confirm the result:
Step 4
...
Confirm the result
After the whole flash procedure finished, you need to confirm the result is successful.
...