...
Username: admin
Password: admin
step 1: Log in
...
step 2: set network setting and port details
click NETWORK-NETWORK SETTINGS to set the ip. ensure that the gateway and the elastix can ping each other.
click T1/E1 ->General->portdetail. below picture use pri signalling.
...
step 3: create a sip endpoint at web
click VOIP----VOIP ENDPOINT----ADD NEW SIP ENDPOINT
...
step 4: create a sip trunk at elastix
in elastix web interface
click PBX->TRUNKS->ADD SIP TRUNKS
...
step 5: set routing rules in GATEWAY web interface
choose ROUTING->CALL ROUTING RULES->NEW CALL ROUTING RULE
...
when elastix sip number 601 length is less than the 5.,it will be delete. 123456 instead of port1 line number.
...
step 6: configure routings in elastix
1> create a sip extension 601
...
the call coming from 888888 will send to sip extension 601.
...
3> outcoming route
...
step 7
call out: sip extension 601 enter 8+phonenumber it will use elastix route(outbound) , this route use elastix trunk(test), when 601 come to the gateway, it will use gateway route(outbound), and send the call to out through port1.
...