...
Outgoing call: from 3CX SIP extension 100 300 to the gateway through relay 10000;
Incoming call: call from an outside line to the gateway, through SIP trunk 10000 to 3CX, and then send the call to the 100 300 SIP extension through 3CX;
...
parameter name | value |
|---|---|
main trunk No | 10000 |
trunk name | 10000 |
Number of SIM Calls | 1 |
Type of Authentication | register account based |
Authentication Password | 12345678 |
Step 2. Create extension 100300
...
parameter name | value | |
|---|---|---|
extension | 100300 | |
ID | 100300 | |
password | 123456 |
Step 3. Dial rules in 3CX web
...
parameter name | value | |
|---|---|---|
name | inbound | |
DID | 10000 | |
Destination for calls during office hours | Extension 100300 |
Click Outbound Rules—>Add Outbound to set outbound rules
...
Taking advantage of SIP software such as Xlite, eyeBeam to register a SIP extension(100300). After all above steps, you can try to make calls and send SMS.
...
Test call:
Incoming call test: Dial the number of port 1 on the gateway via your mobile to see if 100 300 will ring. If 100 300 rings, it means your configuration is successful; unless, it means there is something wrong with your configuration, please check it.
Outgoing call test: Dial your mobile number on 100 300 extension registered in a software phone. If your mobile rings, it means your configuration is ok; unless, please check your configuration.
...