...
Figure 1-3-1 Product Appearance
...
Figure 1-3-2 Front Panel（插入图片）
...
1：Running status indicator
...
4：Analog interface
Figure 1-3-3 Back Panel（插入图片）
...
1：Power
2：Power switch
3：Grounding port
...
Figure 1-5-2 RJ21 Pin Definition Diagram（插入图片）
...
Table 1-5-3 RJ21 Pin Definition Table
...
You can enable the automatic restart function to make your gateway restart after working for a certain period of time to achieve higher work efficiency.
Figure 2-4-2 Scheduled Reboot Types
...
2.5 Tools
In the tool page, users can restart the gateway, upgrade firmware, upload and back up configuration files, and restore factory settings.
The analog gateway supports individual system restart or Asterisk restart.
Figure 2-5-1 Reboot PromptTools
...
Notice: When you confirm the restart, the system will automatically end all current calls.
...
Figure 2-5-5 Restore Configuration File
...
Figure 2-5-6 Factory ResetRestore System
...
Notice: You can restore the gateway to factory settings by dialing. Connect the phone to the FXS port of the gateway and dial "*1*2*3*4" , then it will restore the gateway to factory settings.
...
3.1 Channel Settings
Figure 3-1-1 Channel Status Display InterfaceSettings
...
Click the button to automatically modify the corresponding port information.
...
Figure 3-1-3 FXS Port Configuration
...
3.2
...
Pickup Settings
Call pick-up is a feature used in a telephone system，which allows one phone to answer a call on the another phone. You can set the “Time Out” and “Number” parameters individually or globally for each port. This function is realized by dialing a series of specific numbers, provided that you enable this function and set the "number" parameter correctly.
Figure 3-2-1 Pick-up ConfigurePickup Settings
...
Table 3-2-1 Definition of Pick-up
...
The correct use of the dial matching table can help shorten the call establishment time.
Figure 3-3-1 Port Configure
...
Dial Matching Table
...
3.4 Global Settings
Figure 3-4-1 General Configuration
...
3.6 FXS
Figure 3-6-1 Calling NumberID
...
Table 3-6-1 Definition of Calling Number
...
Options | Definition |
Encoding | Global encoding settings: mulaw, alaw |
Impedance | Impedance setting |
Figure 3-7-2 Calling Number Detection
...
CallerID Detect
...
Table 3-7-2 Instructions of Calling Number Detection
...
On this page, the status information about the SIP account is displayed.
Figure 4-1-1 SIP StatusEndpoints
...
Click the edit button to modify the corresponding SIP information.
...
If you set up a SIP endpoint by registration “None” to a server, then you can’t register other SIP endpoints to this server. (If you add other SIP endpoints, this will cause Out-band Routes and Trunks confused.)
Figure 4-1-2 Main Endpoint Settings
...
For convenience, we have designed a method that you can register your SIP endpoint to your gateway, thus your gateway just work as a server.
Figure 4-1-3 Main Endpoint Settings
...
When "Gateway is registered to the endpoint", you need to fill in the username and password, and you can register multiple SIP endpoints to the server. Due to the difference in usernames and passwords, there will be no confusion between routing and Trunks.
Figure 4-1-4 Main Endpoint Settings
...
Table 4-1-1 Definition of Endpoint Settings Options
...
4.1.2 Advanced: Registration Options
Figure 4-1-5 Definition of Registration Options
...
Table 4-1-2 Definition of Registration Options
...
Options | Definition |
Media Settings | Select codec from the drop down list. Different encoding priorities choose different encoding methods. |
4.2 FXS Batch Binding SIP Accounts
...
If you want to bind SIP accounts in batches on the FXS port, you can configure this page.
Notice: It is only available in the "This gateway registers with the endpoint" working mode.
Figure 4-2-1 FXS Batch Binding SIP Accounts in Batches
...
4.3
...
Batch Create SIP Accounts
...
On this interface, users can create multiple SIP accounts at one time. You can choose any registration mode.
Figure 4-3-1 Batch Create SIP Endpoints
...
4.4 Advanced SIP Settings
...
Figure 7-1-2 Putty Display Image（插入图片）
...
7.2 Asterisk CLI
In this page, you are allowed to run Asterisk commands.
...