...
Figure 2-1-1 System Status(插入图片)
...
2.2 Time
Table 2-2-1 Description of Time Settings
...
Figure 2-2-1 Time Settings（插入图片）
...
You can set your gateway time Sync from NTP or Sync from Client by pressing different buttons.
...
Figure 2-3-1 Login Settings（插入图片）
...
Notice: Whenever you do some changes, do not forget to save your configuration.
...
Figure 2-4-1 Language Settings(插入图片)
...
2.4.2 Scheduled Reboot
You can enable the automatic restart function to make your gateway restart after working for a certain period of time to achieve higher work efficiency.
Figure 2-4-2 Reboot Types（插入图片）
...
2.5 Tools
In the tool page, users can restart the gateway, upgrade firmware, upload and back up configuration files, and restore factory settings.
...
Figure 2-5-1 Reboot Prompt（插入图片）
...
Notice: When you confirm the restart, the system will automatically end all current calls.
...
Figure 2-5-2 Update Firmware（插入图片）
...
After configuring your gateway, you can download the current configuration file. When you need to configure other gateways of the same model or restore the gateway to factory settings, you can choose to upload this backup configuration file without the need to reconfigure the gateway .
...
Figure 2-5-3 Upload and Backup Configuration Files（插入图片）
...
Figure 2-5-4 Voice Record（插入图片）
...
Figure 2-5-5 Restore Configuration File（插入图片）
...
Figure 2-5-6 Factory Reset（插入图片）
...
Notice: You can restore the gateway to factory settings by dialing. Connect the phone to the FXS port of the gateway and dial "*1*2*3*4" , then it will restore the gateway to factory settings.
...
Figure 2-6-1 System Information Interface（插入图片）
...
3. Analog Settings
You can see much information about your ports on this page.
...
Figure 3-1-1 Channel Status Display Interface（插入图片）
...
Click the button to automatically modify the corresponding port information.
...
Figure 3-1-3 FXS Port Configuration（插入图片）
...
3.2 Pick-up Settings
Call pick-up is a feature used in a telephone system，which allows one phone to answer a call on the another phone. You can set the “Time Out” and “Number” parameters individually or globally for each port. This function is realized by dialing a series of specific numbers, provided that you enable this function and set the "number" parameter correctly.
Figure 3-2-1 Pick-up Configure（插入图片）
...
Table 3-2-1 Definition of Pick-up
...
Figure 3-3-1 Port Configure（插入图片）
...
3.4 Global Settings
Figure 3-4-1 General Configuration（插入图片）
...
Table 3-4-1 Instruction of General
...
Figure 3-4-2 Fax Configuration（插入图片）
...
Table 3-4-2 Definition of Fax Option
...
Figure 3-4-3 Country Configuration（插入图片）
...
Table 3-4-3 Definition of Country Setting
...
Figure 3-5-1 Function keys（插入图片）
...
3.6 FXS
Figure 3-6-1 Calling Number（插入图片）
...
Table 3-6-1 Definition of Calling Number
...
Figure 3-6-2 Other Parameters（插入图片）
...
Table 3-6-2 Definition of Other Parameters
...
3.7 Drive
Figure 3-7-1 Regular（插入图片）
...
Table 3-7-1 Definition of Regular
...
Figure 3-7-2 Calling Number Detection（插入图片）
...
Table 3-7-2 Instructions of Calling Number Detection
...
Figure 3-7-3 Hardware Gain（插入图片）
...
Table 3-7-3 Instruction of Hardware gain
...
On this page, the status information about the SIP account is displayed.
Figure 4-1-1 SIP Status（插入图片）
...
Click the edit button to modify the corresponding SIP information.
...
Figure 4-1-2 Endpoint Settings（插入图片）
...
For convenience, we have designed a method that you can register your SIP endpoint to your gateway, thus your gateway just work as a server.
Figure 4-1-3 Endpoint Settings（插入图片）
...
When "Gateway is registered to the endpoint", you need to fill in the username and password, and you can register multiple SIP endpoints to the server. Due to the difference in usernames and passwords, there will be no confusion between routing and Trunks.
Figure 4-1-4 Endpoint Settings（插入图片）
...
Table 4-1-1 Definition of Endpoint Settings Options
...
Figure 4-1-5 Definition of Registration Options（插入图片）
...
Table 4-1-2 Definition of Registration Options
...
Figure 4-2-1 Binding SIP Accounts in Batches（插入图片）
...
4.3 Add SIP Accounts in Batches
...
Figure 4-3-1 Batch SIP Endpoints（插入图片）
...
4.4 Advanced SIP Settings
...
Figure 4-5-1 TLS Settings（插入图片）
...
Table 4-5-1 Instruction of TLS
...
Sometimes you want to make a call through one port, but you don’t know if it is available, so you have to check which port is free. That would be troublesome. But with our product, you don’t need to worry about it. You can combine many Ports or SIP to groups. Then if you want to make a call, it will find available port automatically.
Figure 5-2-1 Group Rules（插入图片）
...
You can click the "Add" button to set up a new group, if you want to modify an existing group, you can click the "Edit" button
...
Figure 5-2-2 Create a Group（插入图片）
...
Figure 5-2-3 Modify a Group（插入图片）
...
Table 5-2-1 Definition of Routing Groups
...
Figure 6-1-1 LAN Settings Interface（插入图片）
...
Table 6-1-1 Definition of Network Settings
...
Figure 6-2-1 VPN Interface（插入图片）
...
6.3 DDNS Settings
You can enable or disable DDNS (Dynamic Domain Name Server) according to your needs
Figure 6-3-1 DDNS Interface（插入图片）
...
Table 6-3-1 Definition of DDNS Settings
...
Figure 6-4-1 Network Connectivity Checking（插入图片）
...
Figure 6-4-2 Channel Recording（插入图片）
...
Figure 6-4-3 Capture Network Data（插入图片）
...
Table 6-4-1 Definition of Channel Recording
...
Figure 6-5-1 Security Settings Interface（插入图片）
...
6.6 Firewall Security Rules
Figure 6-6-1 Firewall Security Rules Interface（插入图片）
...
7. Advanced
7.1 Asterisk API
...
Figure 7-1-1 API Interface（插入图片）
...
Table 7-1-1 Definition of Asterisk API
...
Figure 7-2-1 Asterisk Command Interface（插入图片）
...
For example: enter "help" or "?" in the command bar, after execution, the page will prompt for executable commands, as shown in the figure above.
...
Figure 7-3-1 Configuration Files List（插入图片）
...
Notice: After modifying the configuration file, Asterisk needs to be reloaded.
...
Figure 7-5-1 TR069 Interface（插入图片）
...
7.6 SNMP
Figure 7-6-1 SNMP Interface（插入图片）
...
7.7 Automatic Configuration Settings
Figure 7-7-1 Automatic Configuration Settings Interface（插入图片）
...
8. Logs
8.1 Log Settings
In the log setting interface, open the corresponding log option, and you can view different logs in the corresponding interface. Take the system log as an example.
Figure 8-1-1 Logs Settings（插入图片）
...
Figure 8-1-2 System Log Output（插入图片）
...
Table 8-1-1 Definition of Log Option
...
Figure 8-2-1 Call Detail Record（插入图片）
...